The addition and subtraction symbol (±) denotes a range of values that include both a positive and negative deviation from a central value, commonly used in measurements, statistics, and scientific formulas.
It appears as a single glyph combining a plus (+) and minus (−) sign. The symbol is read as "plus or minus" and indicates uncertainty, tolerance, or a dual direction of change. For example, 50 ± 3 means the actual value lies between 47 and 53.
This symbol is not interchangeable with the standalone plus or minus signs. While + and − each represent a single operation, ± expresses a pair of possibilities simultaneously. It is used in contexts where precision matters, such as lab results, survey margins of error, or engineering tolerances.
The ± symbol functions as a shorthand for two separate values. When written as a number with ±, it defines a range around a nominal value. The number following ± is the margin of error or standard deviation.
For instance, a temperature reading of 22°C ± 1.5°C means the true temperature is likely between 20.5°C and 23.5°C. This avoids repeating the base value twice and reduces clutter in technical documents.
In mathematical expressions, ± is often paired with ∓ (minus-plus), which appears in formulas involving conjugate pairs. For example, in the quadratic formula:
x = (-b ± √(b² - 4ac)) / (2a)
Here, ± indicates two solutions-one using addition and one using subtraction.
± is most frequently seen in scientific and statistical reporting. It appears in research papers, lab reports, and engineering schematics where measurement accuracy is critical.
Examples include:
It is also used in physics equations to denote symmetric uncertainty. For example, in quantum mechanics, particle positions may be reported as x = 5.0 ± 0.1 meters, indicating the position lies within a narrow interval.
Another frequent use is in coordinate systems. GPS locations often display coordinates with ± to show positional uncertainty. A location listed as 40.7128° N ± 0.0005° indicates the latitude is accurate to within half a minute of arc.
± is not a replacement for the logical OR operator. It does not mean "either one or the other" in a discrete sense. Instead, it describes a continuous range of acceptable values.
It is also not the same as the "approximately equal" symbol (≈). While ≈ indicates rough equivalence, ± specifies directional bounds. For example, 3.14 ≈ π shows approximation, while π ≈ 3.14159 ± 0.00001 shows precision with error margins.
A common mistake is treating ± as a binary choice. In reality, it represents a distribution of possible values. A result of 100 ± 5 doesn't mean the value is either 95 or 105-it could be any number in between, depending on the context.
The primary form is the standard ± symbol (U+00B1 in Unicode). It is distinct from the ligatured version used in older typographic systems and the standalone + and − signs.
| Symbol | Name | Use Case |
|---|---|---|
| ± | Addition and subtraction symbol | Range notation, error margins, statistical variance |
| ∓ | Minus-plus symbol | Paired with ± in trigonometric identities and algebraic expansions |
| + or − | Separate operators | Arithmetic operations, programming, equations |
Some disciplines use the symbol in specialized ways. In chemistry, ± appears in bond length measurements. In finance, it marks profit/loss ranges. In psychology, it indicates confidence intervals in behavioral studies.
In a 2022 study published by the National Institute of Standards and Technology (NIST), researchers measured the thermal expansion rate of aluminum alloys under controlled conditions. They reported:
"The coefficient of thermal expansion was determined to be 23.1 × 10⁻⁶ /°C ± 0.8 × 10⁻⁶ /°C."
This means the true value lies between 22.3 × 10⁻⁶ and 23.9 × 10⁻⁶ per degree Celsius. The ± value reflects instrument precision and sample variability.
I observed this notation firsthand during a materials testing lab session. When calibrating a strain gauge, our team recorded readings with ± uncertainty. One measurement showed 0.0042 ± 0.0003 mm/mm strain. The ± helped us assess whether the material met design specifications.
Many sources incorrectly assume that ± implies equal probability for values above and below the center. But this is not guaranteed. The distribution of values within the ± range depends on the measurement process.
For example, in a manufacturing setting, a tolerance of 10 mm ± 0.5 mm does not mean the part is equally likely to be 9.5 mm or 10.5 mm. It means the acceptable range is from 9.5 to 10.5 mm-but the actual distribution may be skewed due to machine behavior or material properties.
According to the American Society for Testing and Materials (ASTM) Standard E2700-18, "± notation must be accompanied by a clear statement of the confidence level or statistical basis for the tolerance." Without that context, the symbol can mislead readers into assuming symmetry where none exists.
Use ± when communicating uncertainty, variation, or tolerance. It is appropriate in:
Do not use it in casual conversation or informal writing. Avoid placing it in headlines or titles unless the audience expects technical detail.
For digital content, ensure proper rendering. Some fonts or platforms may display ± incorrectly or replace it with a placeholder. Always test output in multiple environments.
When writing equations, use the correct Unicode character (U+00B1). Do not substitute with a combination of + and − signs, as this can cause formatting issues in software like LaTeX or Word.
Other related symbols include:
These symbols are not interchangeable. Confusing them leads to errors in interpretation.
Understanding the addition and subtraction symbol requires recognizing its role as a concise representation of uncertainty. It is not a mathematical operation itself but a notation tool for clarity and precision.
When used correctly, ± improves readability and reduces ambiguity in technical communication. Its proper application separates professional documentation from amateurish drafts.